Construction 1x2x0,64 

• Conductor:                         Bare solid copper wire
                                     diameter around 0.64 mm; Cross-section around 0.32 qmm
• Insulation:                        Polyethylene foam skin according to DIN EN 50290-2-23
• Core colours:                      green-red
• Stranding:                         2x core and 2x filler/filler for VVB
• Wrapping:                          1 layer of plastic film, overlapped, running lengthwise
• Shield:                            One layer of aluminum composite foil, overlapped, running lengthwise
                                     Aluminum sides on the outside, braiding of tinned copper wires
                                     single wire diameter 0.1 mm; optical coverage > 60%
• Sheath:                            PVC mixture according to DIN EN 50290-2-22
                                     Colour: violet - RAL 4001

Construction 4x core 1,5 qmm

• Conductor:                         bare copper wires; Wire 30x0.25mm
                                     diameter around 1.6 mm; Cross-section around 1.5 qmm
• Insulation:                        PVC mixture according to DIN EN 50290-2-21
• Core colour:                       3 x black + number printing white; 1x green-yellow

Construction VVB + (L)2YB2Y

• Stranding:                         Profibus 1x2x0.64 + 4x core 1.5 mm² + 9x filler/filler
                                     to the stranding association (VVB); Arrangement variable0
• Wrapping:                          At least one layer of plastic film, overlapped
                                     (longitudinal or braided)
• Layered jacket:                    Polyethylene-coated, longitudinally running aluminum tape and
                                     Sheath: Polyethylene L/MD according to DIN EN 50290-2-24
                                     wall thickness: 1.2 ± 0.2mm; Colour: black - RAL 9005
• Reinforcement:                     one layer of galvanized steel strip; Thickness: 0.2mm; Space about 2 mm
• Protective cover:                  Polyethylene L/MD according to DIN EN 50290-2-24
                                     wall thickness: 1.4 ± 0.2mm; Colour: black - RAL 9005
• Dimensions:                        Outer diameter: approx. 19.4 ± 0.8 mm (RW)
                                     Weight: around 375 kg/km (RW)

Properties / operating conditions 1x2x0.64:

• Loop conductor resistance:          115 Ω/km max
• Insulation resistance:              5 GΩxkm min
• Operating capacitance:              30nF/km max
• Characteristic impedance:           150 ± 15Ω
• Coupling loss:                      > 80dB
• Coupling resistance at 10MHz:       < 20mΩ/m
• Test voltage:                       1500 V - 50 Hz - 1 min
• Peak Operating Voltage:             250V

Properties / conditions of use core 1.5 qmm:

• Conductor resistance:              13.3 Ω/km max
• Insulation resistance:             20 MΩxkm min
• Test voltage:                      3000 V - 50 Hz - 1 min
• Rated voltage U0/U:                300 / 500 V

Properties / conditions of use

• Temperature range:                 flexible -20 °C to +50 °C
                                     permanently installed max. +70 °C
• Bending radius:                    15x cable diameter

Special cable with rodent protection and protective cover
Laying in cable ducts and ducts as well as outdoors and in the ground; Cross-waterproof cable core

Article number: 44302S6410